Theko e Ntle ea Bare Shaft Wafer/Lug Connection Butterfly Valve Ductile Iron Rubber Center Lined Valve ea ho Fetola Metsi Valve

mokoti o se nang lethovalafo ea serurubelevalve ea China ea ho lokisa metsi

Tlhaloso

Li-valve tsa Serurubele tse Bohareng

Kakaretso

• Boholo: 1.5” -72.0” (40mm-1800mm)
• Maemo a Mocheso: -4F-400F (-20C – 204C)
• Tekanyo ea Khatello: 90 psig, 150 psig, 230 psig, 250 psig

Likaroloana

• Mekhoa ea 'Mele: Wafer, Lug le Habeli Flanged
• Lisebelisoa tsa 'Mele: Tšepe e Lahliloeng, Tšepe e Lahliloeng, Tšepe e Lahliloeng ea Nylon 11 kapa Tšepe e Lahliloeng, Tšepe ea Khabone, 304 le 316SS
• Sekoahelo sa 'Mele: Epoxy ea Polyester e nang le likarolo tse peli tse tloaelehileng, Nylon e khethiloeng 11
• Disiki: Tšepe e koahetsoeng ka Nylon 11, 304SS, 316SS, Boronse ea Aluminium, Nylon 11 e koahetsoeng ka 316SS
• Litulo: EPDM (Sehlopha sa Lijo), Buna N, Viton, EPT e Tšoeu (Sehlopha sa Lijo), Hypalon, Silicone, Neoprene
• Libere: Bronze e ka Tlase kapa (e khethiloeng) SS, E ka Holimo (kaholimo ho setulo) SS, Delrin e ka Holimo
• Likutu: 410SS, 304SS, 316SS, 17-4 Ph SS
• Ho Hloma: Sekoti sa ISO-5211 (sekwere se senyenyane) le Pad ea ho Hloma
• Drive: Shaft e le 'Ngoe ho isa ho 14”, Shaft Spline ho Disc Attachment(VF7A), Split Shaft>0” ka Spline Drive (VF7A)
• Ho Boloka Dikutu: 1.5” ho isa ho 12.0” e na le Q Pin Slot ka Top Pad e Bolokang SS Through Pin, 14.0” ho isa ho 48” mme Divalve Tsohle tsa Tshepe e sa Tshabeng di na le Plate e ka Tloswang e Bolokang SS Through Pin
• Likhatello tse Sebetsang: 87 psig, 150 psig, 230 psig Ho Thibela ho Tiea ha Bubble ka Tsela e 'Ngoe.
• 5”-12.0” Lug e Lekantsoeng ka 200 psig Dead End Shutoff, 14.0” le hodimo Lug e Lekantsoeng ka 150 psig Dead End Shutoff, Ditlaleho tsa Teko di a Fumaneha
• Li-valve tsa Leibole tsa Poraefete lia fumaneha

• BoharengLi-valve tsa SerurubeleLitlhaloso

  • Likhokahano tsa Qetello: 125/150 ANSI, Wafer, Lug, Flanged
  • Botenya ba Lebota: ASME B16.34, AWWA C504
  • Ho kenya: ISO-5211 (E lekana le basebetsi bohle ba ISO-5211)
  • Moralo: ISO-5208, AWWA C504, ASME B16.34
  • Lifahleho li talimane: API-609, ISO-5752, AWWA C504(54.0”-72.0”)
  • Tšoao: MSS-SP-25
  • Setifikeiti sa EX: ATEX 94/9/EG Sehlopha sa II Sehlopha sa 2 GD
  • Setifikeiti sa ABS: Melao ea Sejana sa Tšepe sa ABS 1-1-7/7, 4-6-2/5.11

  Likopo

  • HVAC
  • Tšebeletso ea Lijo
  • Khemik'hale ea Petrochemical
  • OEM
  • Taolo ea Mollo
  • Metsi a leoatle
  • Khase ea Flue
  • Khemikhale